Where to buy BPC-157 10mg & TB-500 10mg Blend? Shop now for BPC-157 10mg & TB-500 10mg Blend with exceptional quality and get more for less with our bulk sales. Quick 48-hour delivery available.

BPC-157 is a peptide chain derived from a naturally occurring protein in the human stomach. It is thought to interact with growth factors and cytokines, which are important signaling molecules that regulate cell growth, differentiation, and inflammation.  It has been shown to stimulate the production of extracellular matrix proteins and promote the growth of new blood vessels, both essential in tissue repair and regeneration.

BPC157 is currently being studied for its potential therapeutic effects on a variety of conditions, including gastrointestinal disorders, musculoskeletal injuries, and other inflammatory conditions.

TB-500, derived from the naturally occurring protein Thymosin Beta-4, is a synthetic peptide that binds to a protein called actin, which is involved in the formation of new blood vessels and the repair of damaged tissues. By binding to actin, TB-500 helps stimulate the growth of new blood vessels and promotes the formation of new tissue functions.

The ability of TB500 to reduce inflammation and promote cell migration, proliferation, and differentiation, which can help to facilitate tissue repair and regeneration has been demonstrated in various research. It is currently studied for its potential to enhance athletic performance and improve recovery from injury.

Peptide & Compound Characteristics

BPC-157 10mg/vial

Chemical Formula: C62H98N16O22
Molecular Mass: 1419.5
Synonyms: Body Protection Compound 15, Bepecin, L-Valine, glycyl-L-alpha-glutamyl-L-prolyl-L-prolyl-L-prolylglycyl-L-lysyl-L-prolyl-L-alanyl-L-alpha-aspartyl-L-alpha-aspartyl-L-alanylglycyl-L-leucyl-
CAS Number: 137525-51-0
PubChem: 994197
Total Amount of the Active Ingredient: 10mg (1 vial)
Shelf Life: 36 months

TB-500 10mg/vial

Chemical Formula: C38H68N10O14
Molecular Mass: 889.01g/mol
Synonyms: Thymosin Beta-4 Acetate, Thymosin Beta 4, L-Thymosin Beta-4, TB4
CAS Number: 885340-08-9 77591-33-4
PubChem: 16132341
Total Amount of the Active Ingredient: 10mg (1 vial)
Shelf Life: 36 months

When You Buy BPC157 & TB500 Blend we Guarantee Quality

At American Research, we are dedicated to providing researchers with high-purity BPC-157 & TB-500 Blend that meets the strictest quality standards. Products listed on our site undergo a rigorous quality control process to ensure reliability and consistency for your research.

1. Receipt and Inspection: Upon receiving BPC-157 & TB-500 Blend from our trusted supplier network, we perform a preliminary quality check to ensure the product meets baseline specifications.

2. Purity and Assay Testing: Before products are listed for sale, they undergo third-party purity testing to confirm the percentage of the active compound and assay testing to verify the compound’s concentration.

• Purity Testing: Determines the level of impurities or contaminants in the product, ensuring it meets research-grade standards.
• Assay Testing: Confirms the compound’s chemical composition and potency, verifying its suitability for experimental use.

3. Testing Methods: Our testing partners use advanced analytical techniques, including:

• Purity Testing: Determines the level of impurities or contaminants in the product, ensuring it meets research-grade standards.
• Assay Testing: Confirms the compound’s chemical composition and potency, verifying its suitability for experimental use.

4. Approval for Sale: After these tests return positive results we list BPC-157 & TB-500 Blend on our site for purchase. This ensures you receive validated research-grade products that you can trust for your experiments. Lab tests are occasionally published on the website.

Guide to Dosing & Mixing Peptides

American Research offers a wide range of research peptides and compounds, which are third-party tested for quality and purity​. Whether you’re a seasoned scientist or new to the field, handling these products correctly is crucial. If you plan to buy a peptide online from American Research, make sure you know how to mix it into solution and approach dosing safely. This guide will cover the basic steps to prepare your peptide vials and important considerations for dosing in a research setting. (Please note: these products are strictly for laboratory research use, not for human or animal use.)

Peptide Mixing Basics

Most peptides from American Research come in a powdered form (lyophilized) inside a sterile vial. Before you can use a peptide in an experiment, you'll need to mix (reconstitute) it with a liquid. Here’s how researchers typically do it:

• Choose the Right Solvent: The go-to choice is usually bacteriostatic water or sterile saline. Bacteriostatic water contains 0.9% benzyl alcohol, which keeps the solution sterile for longer by inhibiting bacterial growth​. If your research only requires a one-time use solution, sterile water works as well​. Both are sterile; the key difference is bacteriostatic water lets you store the mixed peptide for reuse over several days/weeks.
• Slow Reconstitution: Once you have your solvent, use a sterile syringe to draw up the desired amount. Inject it slowly into the peptide vial. It's best to angle the stream of liquid against the wall of the vial, so it gently flows over the powder. This slow addition helps the peptide dissolve without causing it to foam or fragment. You typically don't want to stir or shake vigorously (this can actually damage the peptide) – if anything, a gentle roll or swirl can help if the powder is stubborn, but avoid any rough handling.
• Wait and Inspect: Let the vial sit for a moment after adding the liquid. Most peptides will dissolve completely within a few minutes. Check that the solution is dissolved and that no powder remains undissolved. Once everything is dissolved, you have a peptide solution ready to use. Make a note of the total volume you added, as you'll need this info for dosing calculations.
• Label and Store: It’s good practice to label the vial with the date and concentration (e.g., “Compound X – 5mg in 2mL”). If the peptide is going to be used over multiple days, store the reconstituted vial in the fridge to maintain stability. Most peptides will remain potent for a certain period if refrigerated (often a few weeks, but check any product info or literature for specifics).

Dosing Considerations for Researchers

Dosing research compounds requires careful thought – there's no one-size-fits-all answer. You might be searching for “How to dose BPC157 & TB500 Blend” or looking up “How to mix BPC157 & TB500 Blend”, and find a range of opinions. Here are some neutral, science-based tips to guide you:

• Refer to Scientific Data: The best source of dosing guidance is published scientific literature. Look for studies or articles where the peptide (or a similar one) was used. See what dose (e.g., in mg/kg for animal studies, or μM for cell studies) the researchers employed. This gives you a ballpark of what has been tested. Essentially, your dosing should be literature-driven. If multiple studies report effects at a certain dose, that’s a strong clue for your starting point.
• Calculate the Dose in Your Units: Once your peptide is mixed, you need to translate those literature doses into the volume you’ll draw from your vial. This involves a bit of math: For example, if the literature says 1 mg per kg body weight in a mouse study, and you have a 5 mg/mL solution, you'd calculate how many mL corresponds to the needed mg for your subject. Utilize the concentration info you labeled earlier. There are online tools and formulas to make this easier – you input the mass in the vial and the volume added, and it can tell you the concentration and even allow you to plug in a desired dose to get the volume​.
• Start Small, Observe Results: In research, it's common to start at the lower end of effective doses reported. You can always increase the dose in subsequent experiments if the effect is too small. This cautious approach helps avoid unexpected outcomes. Remember, more is not always better; optimal dosing is about finding an effective window, not hitting the highest possible amount.
• Record Everything: Keep a log of how you are dosing your compounds – e.g., “Day 1: 0.2 mL = 1 mg dose administered to culture.” This will help you track what was done in each experiment and is useful when you analyze your results or write up findings. 
• No Therapeutic or Dietary Use: Just a reminder, when we talk about “dosing” here, it’s in the context of a controlled experiment. These compounds are not to be dosed in any kind of human scenario, and any reference to dose is about laboratory research amounts. All dosing info should stay within the realm of scientific experimentation and follow ethical guidelines for research.

Peptide and Compound Forms and Bundles

American Research provides its compounds in various product forms to accommodate different research preferences:

• Vials of Powder: The most common format for peptides is a lyophilized powder in a vial (for example, a 5mg vial of a growth factor peptide). This format requires reconstitution as discussed. It’s beneficial because you can choose your concentration by adjusting how much liquid you add. If you need a highly concentrated solution, you might add less liquid; for a less concentrated solution, add more. This flexibility is great for tailoring to your experiment’s needs.
• Capsules: Some compounds, particularly certain research chemicals or SARMs, might come in capsule form from American Research. Each capsule contains a set amount of the compound (say 10mg per capsule). Capsules are convenient for storage and handling – you don’t have to measure out a powder on a scale; the work is done for you. Researchers might open the capsule to dilute the contents into a solution, or use the powder from the capsule directly in an assay, depending on the protocol.
• Multi-Compound Blends: American Research sometimes offers blended products, where two or more complementary research compounds are combined in one vial or capsule. For example, a peptide blend might include a mix of peptide A and peptide B in predefined ratios. The benefit here is convenience – instead of buying two separate vials and mixing them yourself, the blend ensures a consistent combination. Just be sure to read the product description to know the exact contents and ratios in a blend so you can plan your dosing calculations accordingly.
• Bundles/Stacks: You will also find bundle deals or research stacks. These are packages that include multiple different products often purchased together. For instance, a bundle could pair a fat-loss research peptide with a metabolic research compound, catering to a particular research theme. Bundles are cost-effective and ensure you have all relevant items on hand for a comprehensive study. Each product in the bundle will still be in its own form (vial or capsules), so you would mix/dose each according to its type as explained above.

Fast Shipping in the USA and Canada

USA – Delivery to All 50 States

Order BPC157 10mg and TB500 10mg Blend Vials online and enjoy fast, reliable delivery across the USA. Whether you’re in New York, California, or Texas, we ensure your research peptides arrive quickly and securely. Most orders are processed in less than 24 hours and received within 2–5 business days. Shop now to experience the best in quality and service!

Canada – Quick Shipping Nationwide

Shop BPC157 10mg and TB500 10mg Blend Vials online with delivery to all provinces and territories in Canada, including Toronto, Vancouver, Montreal, and Calgary. With fast shipping and secure packaging, you can trust us to provide premium research peptides to your doorstep in 5-10 business days. Buy today for exceptional service and quality!

Disclaimer 

The information provided above is not intended to substitute medical advice, diagnosis, or treatment. Should you have any questions regarding a medical condition, seek the advice of your physician or a qualified healthcare provider. In no case should medical advice be disregarded or delayed because of what you have read or seen. We bear no responsibility or liability for your use of any of our research compounds and products. Please note that they are being sold for research purposes ONLY. We do NOT condone any personal use.

Note: In some cases wherein the assigned top colors are out of stock, a different top color will be used to ensure that your order will not be delayed. Should you need assistance identifying the peptide vial that you received, please send us an email at [email protected].

ALL ARTICLES AND PRODUCT INFORMATION PROVIDED ON THIS WEBSITE ARE FOR INFORMATIONAL AND EDUCATIONAL PURPOSES ONLY.

The products offered on this website are furnished for in-vitro studies only. In-vitro studies (Latin: "in glass") are performed outside the body. These products are not medicines or drugs and have not been approved by the FDA to prevent, treat and/or cure any medical condition, ailment or disease. Bodily introduction of any kind into animals or human is strictly prohibited by law.